-ar Accessories

SparkFun Accessories Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft with a set screw.Dimensions:15mm high19mm diameter

SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumper

SparkFun Accessories This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug 1 female plug plus pins to connect them both. The pins crimp to your cable

SparkFun Accessories Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 8-pin socket.

SparkFun Accessories The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the

SparkFun Accessories This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs.

SparkFun Accessories Sometimes you want a small input and a single button just won't cut it. A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount but easily soldered.

SparkFun Accessories BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m

SparkFun Accessories This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se

SparkFun Accessories These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha

SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

SparkFun Accessories This is a simple SPDT slide switch - great for use as an ON/OFF button or just as a general control switch. The pins are spaced by 0.1" however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC.